Adjustable Frame Panhard Mount Outside 1.75 Inch Artec Industries Exterior Parts & Car Care - Bumpers & Armor - Armor New 3/8 inch bolts will

New 3/8 inch bolts will be needed along with extra wide washers that may be necessary For use with factory skid plates

from making the truss easier to weld

May require additional trimming based on additional trusses and other brackets on axle

Please reinforce the area around the cutout if it is close or overlapping the speed holes

15-minute setup

Adjustable Frame Panhard Mount Outside 1.75 Inch Artec Industries Exterior Parts & Car Care - Bumpers & Armor - Armor New 3/8 inch bolts willAdjustable Frame Panhard Mount. This panhard mount is For use with any 3 link or 4 link scenario. Designed For joints that have either a 1. 75 inch mounting width such as 3 4 inch and 7 8 inch x 3 4 inch rod ends with high misalignment spacers or those with a 2. 625 inch mounting width such as bushings and cartridge joints. Details: Sold as Each Orientation: Outside Joint Width: 1. 75 inch It offer three holes at 2, 3. 25, and 4. 5 inches drop from