100LGB Single track unit panel mount option-set-051 Subject to the energy consumption

Subject to the energy consumption of your model it may continue to move for up to three seconds

25 Metres of 6 wire FLAT RJ12 cable as used by most brands for the DCC data bus – 6 core (with Black Sheath)

The train cost £3 million and took only nine months from concept to completion

you will never have to cut or solder anything

and full certification of the locomotive was achieved in January 2009

100LGB Single track unit panel mount option-set-051 Subject to the energy consumptionSingle track controller designed to sit inside a control panel. This controller has a rotating dial to control the speed of your locomotive and a DPDT switch to control the direction, you can also switch it to the center position to cut off the power to the track. TECHNICAL DETAILS INPUT 1 x 24v AC (GMC M6) or (GMC T6) both rated at 2. 5 Amps OUTPUT 1 x 20v DC Rated at 2. 5 Amps MEASUREMENTS WIDTH 70mm DEPTH 50mm HEIGHT 105mm GMC 100LGB Instructions