Conquest 3/4" x 1.5' A307 Coarse Threaded Rod - Hot Dip Galvanized, 10 TPI | Qty. 100 Crosby G-277 Shoulder Clean Application: Cut the patch

Clean Application: Cut the patch to size

high-strength tie-down needs

2x Proof-Tested: Each clamp is factory-tested to double its WLL and shipped with documentation

000 lb working load limit and 80

This product is intended for use with 12x12 lumber but is also available in other sizes

Conquest 3/4" x 1.5' A307 Coarse Threaded Rod - Hot Dip Galvanized, 10 TPI | Qty. 100 Crosby G-277 Shoulder Clean Application: Cut the patchWhen pairing a nut with threaded rod, the material and finish must match. If these do not match, the nut will not fit the threaded rod. Conquest A307 Threaded Rod with a hot dip galvanized finish offers functional performance for tension, anchoring, and bracing applications in construction. Manufactured to ASTM A307 standards, these carbon steel rods are fully threaded for easy cutting, joining, and fastening over their entire length. The hot dip