0.96" I2C Monocrome OLED Display FPV TXT file into the root

TXT file into the root folder of microSD card

Foam insert to reduce pressure pulses

5W RF power

File and Links

The calibration proecedure takes ~15 seconds

0.96" I2C Monocrome OLED Display FPV TXT file into the rootEasy to use high resolution OLED display with low power consumption. It is small, only about 1" diameter, but very readable due to the high contrast of an OLED display. The display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. The controller works with 3. 3 or 5V without needing any kind of level shifter. So, you can use it with